If water is running or electricity is involved, stop first
A frozen pipe can break away from the ice blockage. If water is spraying, pooling, or entering a wall, shut off the home's main water valve if you can reach it by a dry, safe route, then call a licensed plumber. If you cannot reach it safely, stay out and call for help.
Treat standing water near outlets, appliances, extension cords, or the electrical panel as an electrical emergency. Keep people out of the area and do not reach for a hair dryer, space heater, wet-dry vacuum, or switch while standing in water. Call emergency services or an electrician when the electrical system may be energized.
Open a faucet and find the main shutoff
If there is no visible leak, check another faucet. If the whole home has no water, check for a reported outage or call the water utility before assuming one pipe is frozen. If only one fixture is dry, open the faucet served by the suspected frozen line. A small opening gives melting water and pressure somewhere to go and makes it easier to notice when flow returns. Do not begin DIY thawing until the main water valve is closed, if you can reach it by a dry, safe route. Ice can hide a crack until it melts. If you cannot safely close the valve, stop and call a plumber.
If you cannot find the frozen section, cannot reach the pipe safely, or the home has a fire-sprinkler or unusual plumbing system, stop and call a plumber. Do not remove walls, insulation, or electrical covers just to search for ice.
Start near the faucet, then work toward the blockage
When the pipe is accessible and the area is dry, begin warming near the open faucet and move gradually toward the colder section. This direction lets water escape as ice melts instead of trapping pressure between the ice and a closed valve.
Use gentle, even warmth and keep watching the pipe, joints, and nearby surfaces. Stop immediately if you see a bulge, split, dripping joint, or water inside a wall. The pipe may already be damaged even if it has not leaked yet.
How to Unfreeze Pipes: 5 Methods Ranked by Safety
StormRift ranks these options by the hazards they introduce. Keep the faucet open and stop if you see a leak or bulge or encounter an electrical hazard. The towel and electric heat options draw on American Red Cross guidance.
If the frozen run is behind a wall, ceiling, crawl-space barrier, or other inaccessible area, do not improvise. A plumber can choose a method that protects the pipe and the building.
- Call a licensed plumber first when the frozen section is hidden, inaccessible, damaged, or near standing water or energized equipment.
- Use a heated room and open cabinets under sinks only as passive warming when the home is dry and the pipe is safely accessible.
- Wrap the accessible pipe with warm towels, keeping the faucet open and replacing towels as they cool.
- In a dry area only, use a handheld electric hair dryer with moving warm air; keep it away from water and flammable materials.
- Use an electric heating pad only if its manufacturer explicitly allows pipe thawing. Use it on a dry, accessible pipe and stay with it.
How Long Does It Take to Thaw Frozen Pipes?
A minor freeze can take 2–3 hours to thaw with the affected faucet open, according to Resideo, a home-products manufacturer. The actual time depends on where the ice blockage is and how much pipe is frozen. Indiana OUCC, Hillsborough and Left Hand Water District give no general thaw time. (Resideo)
For passive thawing behind a wall, Resideo suggests warming the room to 75–80°F for about 2–3 hours. This is manufacturer guidance for warming the room. If you can't inspect the frozen pipe, suspect a leak or can't keep the area dry, keep the main closed and call a plumber. (Resideo)
After a safe restart and leak check, follow your own utility's guidance if freezing weather continues. Salt Lake City recommends a slow drip from the faucet farthest from where water enters your home. Ogden City Water Utility describes a stream no wider than a strand of spaghetti during extreme cold or for pipes with a history of freezing. (Salt Lake City Public Utilities, Ogden City Water Utility)
Never use flame or a sudden blast of heat
Never use a torch, lighter, candle, propane heater, kerosene heater, or any other open flame to thaw plumbing. Fire can start inside a wall or ignite nearby insulation before the pipe appears warm.
Do not pour boiling water over a frozen pipe. A sudden temperature change can damage the pipe, and spilled water can create a slip or electrical hazard. Slow, indirect heat is the safer approach.
Check for damage before reopening the main
Keep the faucet open while the ice melts. If you see a crack, bulge, or water where it should not be, leave the main closed and call a plumber.
If there are no signs of damage after thawing, slowly reopen the main while someone watches the pipe and joints if possible. If water leaks or flow does not return, close the main again and call a plumber.
If the pipe has burst
For a burst, shut off the main water supply and open faucets to relieve pressure only if you can reach them safely. Keep people away from wet electrical equipment. Move belongings only when the area is safe to enter; do not use powered cleanup equipment in standing water.
Photograph the pipe and damage, then contact a licensed plumber and your insurer. Drying wet materials promptly can limit secondary damage. Once the leak is stopped and the basement is safe to enter, our basement sump pump guide explains how to choose a pump for a sump pit. Get professional cleanup for contaminated water, hidden wall moisture or structural damage.
When a plumber is the right next step
Call a licensed plumber if you see a crack or bulge, cannot locate the freeze, cannot reach it without opening a wall, have repeated freezes, or suspect damage behind a fixture. The Indiana utility consumer counselor warns that plumbing systems differ and recommends professional help when the situation is uncertain.
A professional is also the right choice when the home has standing water, unusual materials, a boiler or fire-sprinkler system, or a shutoff you cannot operate. A stopped faucet is inconvenient; a hidden burst can damage the building.
Materials for a Safe Thaw
A shutoff can leave the household without tap water during repairs. For emergency drinking water, Indiana OUCC recommends storing 1 gallon per person per day for at least 3 days. (Indiana OUCC)
- Main water shutoff that you can reach by a dry, safe route
- Dry towels and a bucket for drips and surface water
- Flashlight for inspecting cabinets, crawl spaces, and joints
- Warm towels or a handheld hair dryer for a dry, accessible pipe
- Optional battery-powered water alarm with a local buzzer for monitoring after you restore the water. The Basement Watchdog BWD-HWA is also listed at Depot Home Center.
As an Amazon Associate, StormRift.net earns from qualifying purchases.
Optional gearPrevent the next freeze
Before the next cold snap, use our pipe-freeze prevention guide to check for drafts and exposed pipes. If you lower the heat while traveling in winter, Indiana OUCC recommends keeping the thermostat at 55°F or higher. (Indiana OUCC)
For prevention, Hillsborough describes standard pipe sleeves with insulation thicknesses of 1/8 to 5/8 inch and specialty products up to 2 inches. Match the sleeve to the pipe and location. (Town of Hillsborough)
If the freeze happens during a power outage
During a no-heat outage, keep people dry and use only safe indoor warmth. Our stay-warm-without-power guide covers one-room heat retention, layers, vulnerable people, and the carbon-monoxide boundary.
Do not bring a generator, grill, camp stove or fuel-burning outdoor heater inside to warm the plumbing or the room. Our winter outage carbon monoxide safety guide covers generator placement, alarm checks and what to do if an alarm sounds.
FAQ
What should I do first when a pipe freezes?
Check for leaks or electrical hazards first. If the area is safe, close the main water valve and open the affected faucet before applying heat. If you cannot reach the valve by a dry, safe route, stay out and call for help.
Can I thaw a frozen pipe with a hair dryer?
Only when the pipe is accessible, the area is dry, and there is no electrical hazard. Use gentle warm air from near the faucet toward the frozen section, keep the dryer moving, and stop if you see a leak, bulge, or split.
Why should I never use a torch on a frozen pipe?
Open flame can ignite walls, insulation, or nearby materials and can damage the plumbing. Never use a torch, lighter, candle, or other open flame to thaw a pipe.
How do I know if a frozen pipe has burst?
Look for spraying or dripping water, a bulge or split, wet walls or ceilings, unexplained pooling, or unexplained water stains. Shut off the main if it is safe to reach and call a plumber.
When should I turn the water back on?
Keep the faucet open while the ice melts. Turn the main back on slowly only after the accessible pipe stays dry and you are ready to shut it off again; watch joints, cabinets, walls, and ceilings as pressure returns.
When should I call a plumber instead of thawing the pipe myself?
Call when the pipe is hidden or inaccessible, there is standing water or electrical risk, the pipe is cracked or bulging, the plumbing system is unusual, or you cannot confidently locate and operate the main shutoff.
Evidence basis
Last reviewed: 2026-11-15
- American Red Cross: Preventing & Thawing Frozen Pipes
- Indiana Office of Utility Consumer Counselor: Preventing Frozen Pipes
- Hillsborough, NC: Cold Weather Resources
- Left Hand Water District: Frozen Pipes
- American Red Cross: Preventing and Thawing Frozen Pipes
- Resideo: How to Care for Frozen Pipes (manufacturer guidance)
- Salt Lake City Public Utilities: Prevent Frozen Pipes
- Ogden City Water Utility: Prevent Frozen Water Lines
Scope: Educational home-maintenance guidance. Plumbing layouts, electrical systems, and local rules vary; stop when conditions are unsafe and use a licensed plumber.
